- About Us
- Contact Us
- Sign Up
Heavy-duty industries depend on adhesives in many respects throughout manufacture. Such ruggedized sectors like defense and aerospace require not just high-quality bonds and error-free application, but also materials that can withstand shock and impact. Staking is the process of protecting components by minimizing vibration and reducing pressure on leads using adhesives. The process has many uses and benefits, but the question of what materials to use is always a top consideration.
Material characteristics for plastics staking
Because these adhesives will be counted on to reduce vibration and shock, as well as ensure durable bonds stand up in high-stress environments, manufacturers need to search for materials that meet a few criteria for use in staking. Some physical properties to research include:
Epoxies have seen their use surge in modern times, and both one-part and two-part epoxy systems can be used in staking applications. Epoxies are a particularly popular and dependable choice for use in products sent into space, according to Machine Design. Their versatility, cohesion properties and adaptability through engineering make them good fits, as epoxies passing the NASA ASTM E595, the outgassing standard, can grant cryogenic serviceability, optical clarity, thermal conductivity or insulation and resistance to vibrations, thermal shocks or impacts.
One-part epoxies are cured using heat, creating sufficient bonding; but two-part epoxies are mixed with a resin or other hardening substance that increases the strength of their adhesive qualities, and thus make them even more suitable for use in staking. Two-part epoxy systems like the manufacturer Loctite Ablestik 55 are suited to usages in electrical assembly and for purposes like insulation and resistance, key objectives of staking. Mechanical Design added that two-part epoxies can even be treated in a third phase of curing, which can further improve outgassing tendencies.
As previously noted, when considering silicone adhesives in staking, neutral cures are a must. Silicone may be preferred in some applications because of its increased strength and nonflow qualities. Indeed, the manufacturer 832 Multi-Surface is a nonslumping, noncorrosive, flexible silicone paste used for bonding a variety of dissimilar materials, including as concrete, glass, plastics, metals, and rubber. It is recommended for marine equipment, assembly equipment, roof penetrations, concrete floor seams and windows. Meanwhile, the manufacturer SE 9168 silicone adhesive is expressly suited for use in vibration dampening and circuit board repairs. Properties like nonflowing, tack free and flame resistant make it a high-quality choice.
Hot-melt adhesives also have use in staking. Often one-part and solvent-free, these glues are viable in staking operations because of their fast cooling properties and range of chemistries. However, there are drawbacks to using hot-melt adhesives, particularly in relation to dispensing. Staking requires precise application, and hot-melt dispensing can be more of a quick-and-dirty method where not enough attention is paid to how carefully the hot-melt is dispensed. There is also the tendency for these adhesives to run (which is a big risk if leads are overrun by the material), and long-term durability is also at question.