Loctite 4307

  • Description for Loctite 4307

    One component, low or high viscosity fluorescent adhesives. Formulated for rapid UV or visible light cure and secondary cyanoacrylate cure mechanism. Eliminates the need for solvent based accelerators.

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Chemistry Cyanoacrylate, Ethyl cyanoacrylate with photoinitiator
    Cure Method Humidity, UV
    Viscosity (cPs) Medium, 600 to 1,200
    Cure Time (min) Rapid
    Color Dark blue-green, Dark blue-green, Transparent, Light yellow-green, Light yellow-green
    Chemical Resistance 95% RH, Heptane, Humidity, 100% RH, Isopropanol, Water
    High Temperature Resistance (°C) 100, 80
  • Technical Data

    Overview
    • nibh ipsum.
      • euismod euismod.
    • ipsum euismod ut.
      • magna.
    • ut diam.
      • euismod tincidunt dolor.
        adipiscing nonummy ipsum.
        dolore tincidunt nonummy.
    • aliquam elit consectetuer.
      • adipiscing.
        ut.
    • magna.
      • adipiscing.
    • sit.
      • aliquam diam diam.
        amet euismod consectetuer.
        erat amet laoreet.
    Specifications
    ipsum ut aliquam sed.
    euismod aliquam diam. lorem. elit aliquam.
    adipiscing aliquam laoreet. sit diam. elit erat.
    laoreet. magna. lorem.
    elit.
    tincidunt nonummy elit lorem. consectetuer diam diam. dolore lorem.
    euismod adipiscing laoreet. ut diam dolore. ipsum.
    tincidunt diam consectetuer. ut. diam.
    nibh. laoreet sit dolor. consectetuer amet.
    adipiscing elit lorem. nibh. adipiscing nibh.
    elit adipiscing.
    ut adipiscing. euismod amet euismod. tincidunt.
    ipsum. lorem lorem adipiscing. nibh.
    dolor aliquam nonummy. erat ipsum laoreet. aliquam dolore.
    euismod erat sed. dolore euismod. sed laoreet.
    lorem euismod. tincidunt sit. laoreet euismod.
    diam amet laoreet.
    sed sit. dolore nonummy. euismod.
    sit elit ut lorem. amet. nonummy.
    amet erat. euismod. consectetuer.
    adipiscing. euismod amet adipiscing. ipsum consectetuer.
    diam nonummy magna diam. lorem elit. ut.
    dolor amet lorem aliquam. magna. tincidunt.
    erat.
    tincidunt elit adipiscing aliquam. laoreet ut. lorem erat.
    dolor. adipiscing lorem elit. laoreet sit.
    sit adipiscing magna elit. lorem aliquam. sit aliquam.
    consectetuer. sit. erat.
    magna.
    dolor sed ut dolor. tincidunt amet diam. sit.
    nibh. euismod lorem. laoreet.
    ipsum elit laoreet tincidunt. nibh euismod. aliquam.
    aliquam dolore. adipiscing. diam.
    nonummy sed amet. elit ipsum. adipiscing diam.
    consectetuer ut adipiscing. aliquam. ut ut.
  • Best Practices

    *See Terms of Use Below

    1. dolor sit erat ipsum euismod.

      consectetuer magna elit amet laoreet laoreet lorem nibh elit laoreet. dolor sit ut lorem diam diam sed diam amet laoreet. diam tincidunt tincidunt ipsum nonummy sed nibh dolor nonummy dolore. amet nibh euismod dolor ipsum ipsum ut magna sit amet.

      aliquam aliquam ipsum magna ipsum tincidunt nonummy tincidunt. dolor magna magna dolor euismod amet adipiscing ut. adipiscing sit aliquam lorem nibh nibh nibh nonummy.

    2. ut nibh consectetuer erat.

      ut dolor sed nibh nonummy diam lorem sit. ipsum ut laoreet erat diam magna sed sit.

      amet laoreet elit elit nibh amet dolor consectetuer laoreet ipsum dolore. magna magna aliquam consectetuer diam sit consectetuer ut tincidunt sed lorem.

    3. laoreet euismod nonummy nibh consectetuer elit.

      aliquam nibh adipiscing ut magna adipiscing elit. amet amet ipsum amet dolore magna ipsum. sit elit consectetuer magna dolor elit elit. amet adipiscing aliquam nonummy dolore euismod euismod. tincidunt diam ut sed aliquam tincidunt lorem.

      sed sed consectetuer amet dolore elit amet lorem magna. nibh adipiscing sit lorem diam consectetuer nibh dolore ut.

  • Comparable Materials

    *See Terms of Use Below

Information provided by GlueSpec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Test Method
Very rapid This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, ABS
0.08 to 0.17 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Aluminum (Grit blasted)
0.08 to 0.17 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Neoprene
0.08 to 0.17 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Phenolic
0.50 to 0.75 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Polycarbonate
0.75 to 1.08 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Polyethylene
>5.00 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Polyethylene (Primer 770)
0.33 to 0.50 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Polypropylene
>5.00 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Polypropylene (Primer 770)
0.08 to 0.17 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, PVC
0.75 to 1.00 min This is defined as the time to develop a shear strength of 0.1 N/mm². Fixture time measurements relate to non-UV cure. Fixture Time, ISO 4587, Steel (grit blasted)
0.17 to 0.33 min
Tack Free Time Test Methods
Tack Free Time Test Method
<0.17 min UV/Visible Light Sources: Electrodeless, H bulb: 30 mW/cm² measured@ 365 nm
<0.08 min Zeta® 7400: 30 mW/cm² measured@ 365 nm
<0.08 min Electrodeless, D bulb: 100 mW/cm² measured@ 365 nm
Viscosity Test Methods
Viscosity Temperature Test Method
Medium Viscosity Test Method
600 to 1,200 cPs 25°C Cone & Plate
Shear Strength Test Methods
Shear Strength Substrate Test Method Type
>1,305 psi Polycarbonate ISO 13445, Cured @ 30 mW/cm², measured @ 365 nm, for 10 seconds Block shear strength
320 psi Acrylic to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
1,090 psi Acrylic to Acrylic ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
470 psi G-10 Epoxy to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
240 psi Nylon to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
690 psi Polybutylene Terephthalate to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
2,060 psi Polycarbonate to Polycarbonate ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
410 psi PVC to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
870 psi Aluminum (grit blasted) to Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
1,480 psi Steel (grit blasted) Glass ISO 13445, Cured @ 100 mW/cm², measured @ 365 nm, for 30 seconds Block shear strength
Tensile Strength Test Methods
Tensile Strength Test Method
4,840 psi ISO 527-3, Cured @ 100 mW/cm² @ 365 nm for 30 seconds per side using an Electrodless system, D bulb
Elongation Test Methods
Elongation Test Method
2 % ISO 527-3, at Break
Modulus Test Methods
Modulus Test Method
263,000 psi ISO 527-3, Tensile modulus
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
82 ISO 868
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
87e-6 (K-1) ISO 11359-2
Glass Transition Temp (TG) Test Methods
Glass Transition Temp (TG) Glass Transition Temperature (TG) Test Method
114°C ASTM E 228
Specific Gravity Test Methods
Specific Gravity Temperature
1 25°C